BRQFQ - YELLOW PROTOPET VVP-236A

  • MSDS: BRQFQ
  • Manufacturer: WITCO CORP
  • Product Name: YELLOW PROTOPET VVP-236A
  • National Stock Number: 9150-01-023-3934
Product Identification

Product ID:YELLOW PROTOPET VVP-236A
MSDS Date:04/16/1990
FSC:9150
NIIN:01-023-3934
MSDS Number: BRQFQ

Responsible Party
WITCO CORP
PETROLIA, PA 16050
US

Emergency Phone: 504-366-7281;800-424-9300(CHEMTREC)

Info Phone: 412-756-2210;212-605-3911

Preparer: ALEXANDER COUTRAS

Cage: 5H954

Contractor
WITCO CORP
84075 HOUSTON, TX 77042-0075 US

Telephone: 713-975-5858

Cage: 5H954

Ingredients

GREASE, PETROLEUM; (NON HAZARDOUS INGREDIENTS)

CAS: 8009-03-8

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH COLD WATER FOR AT LEAST 15
MIN-CALL A PHYSICIAN. SKIN: FLUSH IMMEDIATELY WITH COLD WATER. CALL
A PHYSICIAN. INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTF RE SP). INGEST: CALL A PHYSICIAN IMMEDIATELY.

Fire Fighting

Flash Point Method:COC
Flash Point:>390F,>199C
Extinguishing Media:DRY CHEMICAL, CO*2, WATER FOG, FOAM, SAND/EARTH.
Fire Fighting Procedures:WATER SPRAY IS AN UNSUITABLE EXTING AGENT.
FIRE FIGHTERS SHOULD USE NIOSH/MSHA APPROVED SCBA & FULL PROT EQUIP
TO PROT AGAINST SMOKE INHALATION.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SHUT OFF LEAK AND DIKE UP LARGE SPILLS. AFTER
COOLING AND SOLIDIFICATION, SCRAPE AND/OR SHOVEL UP MATERIAL.
FINALLY, CLEAN AREA WITH AN OIL ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AWAY FROM FLAME, HEAT (200F MAX)
AND STRONG OXIDIZING AGENTS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOGG W/FULL LNGTH FSHLD.
Other Protective Equipment:WHEN MOLTEN WEAR COVERALLS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV: 0.85-0.88 (H*2O=1).

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:>100F,>38C
Spec Gravity:SUPP DATA
Solubility in Water:NIL
Appearance and Odor:OPAQUE, YELLOW SEMI-SOLID. NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
FLAME, HEAT (200F MAX) & STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:UPON COMBUSTION, CARBON MONOXIDE AND
CARBON DIOXIDE ARE GENERATED.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.